Flash Patch loading instructions

Who are we?

We are dedicated Customer Service Gurus that have worked directly within the Pick community assisting Pick Systems Distributors, Value Added Resellers and End Users for over a decade.

We are available 7 days a week to serve you.

We are Experts with the Virtual and Monitor debugger and have the ability to resolve any issue.

We are very strict about delivering you the highest quality of service.

We can help.

Flash Patch loading Instructions

Shutdown D³ using the shutdown command.
At the Unix prompt, enter rm /tmp/D3_flash-rs-* to remove the previous flash version.

Note: If the D³ files have been removed from the /tmp directory, they should be reloaded using the Unix tar command. This step should then be repeated.
Move the downloaded patch file D3_flash-rs-7.1.18-.Z to the /tmp directory
Enter init s to place Unix in single-user mode
Enter ps -ef|grep "d3 -"|awk '{print "kill -9 " $2}|sh to kill any remaining D³ processes
Enter cd / to change to the root directory
Enter /tmp/D3_setup to run the setup utility
Select option 1 to Install D³ with Current Settings
If an override prompt appears, enter y to accept
Boot D³ using the command d3 -0

Reference Letters

"I just wanted to take a minute to let you know what a great asset Your Technicians are in your Support Department. Not only are they professional and extremely knowledgeable they are also polite and always respond to our calls in a timely manner. Thanks for being there when we needed you the most".

"When dialed, I guess I never expected to be able to complete this task so successfully in such a short time frame. I figured on spending the next two weekends locked up with the RS6000 trying to get through EOY processing."

Click Here to for more!